What are the Specifications of my Amplified Bazooka Bass Tubes enclosure?
Select Amplified Model
| Current Models |
| A-30 Amplifier |
T52A-30 |
T62A-30 |
T82A-30 |
| A-80 Amplifier |
T62A-80 |
T82A-80 |
T102A-80 |
|
|
SAS will continue to service & support discontinued
products, look for this area to be fully functional soon.
| Discontinued Models |
| A-40 Amplifier |
T62A-40 |
T82A-40 |
T102A-40 |
| A-70 Amplifier |
T62A-70 |
T82A-70 |
T102A-70 |
top
|
T62A-80 Specifications
Woofer Size: 6.5"
Efficiency: 100dB*
Dimensions: 18.325" X 6.75" X 8"
Magnet Size: 20 oz.
Weight: 15 lbs.
Rated Output: @ 4 ohms 80 Watts
@ 2 ohms 120 Watts (w/optional slave unit )
(Measurement performed with 100Hz input @ 13.8 Volts battery voltage
and <0.2% THD+N)
|
top
T82A-80 Specifications
Woofer Size: 8"
Efficiency: 102dB*
Dimensions: 18.325" X 8.5" X 10"
Magnet Size: 28 oz.
Weight: 20 lbs.
Rated Output: @ 4 ohms 80 Watts
@ 2 ohms 120 Watts (w/optional slave unit )
(Measurement performed with 100Hz input @ 13.8 Volts battery voltage
and <0.2% THD+N)
|
top
T102A-80 Specifications
Woofer Size: 10"
Efficiency: 104dB*
Dimensions: 21.1" X 10.3" X 12.2"
Magnet Size: 28 oz.
Weight: 25 lbs.
Rated Output: @ 4 ohms 80 Watts
@ 2 ohms 120 Watts (w/optional slave unit ) (Measurement performed
with 100Hz input @ 13.8 Volts battery voltage and <0.2% THD+N)
|
top
T52A-30 Specifications
Woofer Size: 5"
Efficiency: 97dB*
Dimensions: 18" X 5" X 6"
Magnet Size: 20oz.
Weight: 13lbs.
Rated Output: 30W @ 2 (Ohm), (Measurement performed with 100Hz input
@ 13.8 Volts battery voltage and < 1% THD+N)
|
top
T62A-30 Specifications
Woofer Size: 6.5"
Efficiency: 100dB*
Dimensions: 18" X 6.75" X 8"
Magnet Size: 20oz.
Weight: 14lbs.
Rated Output: 30W @ 2 (Ohm), (Measurement performed with 100Hz input
@ 13.8 Volts battery voltage and < 1% THD+N)
|
top
T82A-30 Specifications
Woofer Size: 8"
Efficiency: 102dB*
Dimensions: 18" X 8.5" X 10"
Magnet Size: 28oz.
Weight: 17lbs.
Rated Output: 30W @ 2 (Ohm), (Measurement performed with 100Hz input
@ 13.8 Volts battery voltage and < 1% THD+N)
|
Detailed A-80 Amplifier Specifications
Crossover
18dB per octave low pass electronic crossover continuously variable
from 60Hz to 250Hz.
Filter Type
Third order Butterworth filter.
Input Sensitivity
High Level 2.4 Volts to 25 Volts RMS.
Low Level 100mV to 1 Volt RMS.
Continuously variable gain control
Frequency Response
Crossover at highest setting 15Hz to 250Hz (+0/-3dB)
Crossover at lowest setting 15Hz to 60Hz (+0/-3dB)
Protection
Thermal; over voltage; under voltage; on PC board reverse voltage
(15 amp fuse); in-line power fuse 25amp; fused output to slave unit
(5 amp)
Turn-On Circuit
ON threshold 2.2 Volts; ON Current 6 mA @ 13.8 Volts
Auto Turn-On Mode
High Level input 400mV RMS.
Low Level input 18mV RMS.
Current Consumption
@ maximum output: 26 Amps
@ rated power w/4 ohms load: 10 Amps
@ rated power w/2 ohms load: 16 Amps
@ idle: 0.9 Amps
@ standby: 11mA
top
|
Detailed A-30 Amplifier Specifications
Crossover
18dB per Octave Low Pass Electronic
Crossover point fixed @ 120Hz
Filter Type
Third Order Butterworth Filter
Input Sensitivity
High Level 2.4 Volts to 25 Volts RMS
Low Level 100mV to 1 Volt RMS
Protection
Thermal; over voltage; under voltage
Turn-On Circuit
On Threshold 2.2 Volts
On Current 6mA @ 13.8 Volts
Auto Turn-On Mode
High Level Input 400mV RMS
Low Level Input 18mV RMS
Current Consumption
@ maximum output: 8 A
@rated power: 4.5 A
@idle:150mA
@standby:.05A
top
|
|
Bazooka Efficiency
* The efficiency levels of all Bazooka subwoofers
featuring the patented BassTubesenclosure system are measured in
the typical environment, in the low bass region withone watt of
power.
|