How do I hook-up a slave unit to my Amplified Bazooka?
|
Select Product Model
| Current Models |
| A-80 Amplifier |
T62A-80 |
T82A-80 |
T102A-80 |
| A-30 Amplifier |
No slave output on A-30 amps |
| Discontinued Models |
| A-40 Amplifier |
T62A-40 |
T82A-40 |
T102A-40 |
top
|
A-80 Optional High-Level Output
The Amplified Bazooka has provisions
for high level output to a second Bass Tubes enclosure. If you want
to use this feature, you can purchase a Bazooka slave unit from an
authorized SAS dealer.
Be sure to use a slave unit that is the same
size as you amplified unit. This is necessary because different
size woofers have different efficiencies. These efficiency differences
result in the two woofers playing at different volume levels, making
it difficult to adjust the system to the desired sonic quality.
Located the BROWN and YELLOW wires on the 14-pin
Molex plug, connect the BROWN wire to
the RED terminal of the slave unit, and the YELLOW wire to the BLACK
terminal of the slave unit.
The Amplified Bazooka is now operating under
a 2 ohm load and is delivering a total of 120 watts.
top
|
A-70 Optional High-Level Output
The Amplified Bazooka has provisions
for high level output to a second Bass Tubes enclosure. If you want
to use this feature, you can purchase a Bazooka slave unit from
an authorized SAS dealer.
Be sure to use a slave unit that is the same
size as your amplified unit. This is necessary because different
size woofers have different efficiencies. These efficiency differences
result in the two woofers playing at different volume levels, making
it difficult to adjust the system to the desired sonic quality.
Located the BROWN and YELLOW wires on the 10-pin
Molex plug, connect the BROWN wire to
the RED terminal of the slave unit, and the YELLOW wire to the BLACK
terminal of the slave unit.
The Amplified Bazooka is now operating under
a 2 ohm load and is delivering a total of 100 watts.
top
|
A-40 Optional High-Level Output
The Amplified Bazooka has provisions
for high level output to a second Bass Tubes enclosure. If you want
to use this feature, you can purchase a Bazooka slave unit from an
authorized SAS dealer. Be sure to use a slave unit that is the same
size as you amplified unit. This is necessary because different size
woofers have different efficiencies. These efficiency differences
result in the two woofers playing at different volume levels, making
it difficult to adjust the system to the desired sonic quality. Located
the two Black Wires on the end of the 9-pin plug, connect the first
Black wire to the RED terminal of the slave unit, and the second Black
wire (with ribbing) to the BLACK terminal of the slave unit. The Amplified
Bazooka is now operating under a 2 ohm load and is delivering a total
of 80 watts. |